Censhear™ Standard Fastener
- Industry leading shear and tensile strength
- Solid shank provides excellent alignment
- Stock diameters and grip ranges available
- Compatible with standard pneumatic installation tooling
Censhear™ Elite Long Stroke Fastener
- Three finger design provides extra grip range within a low profile application
- Utilizes new Censhear™ fastener technology
Censhear™ Elite is ideal for applications requiring:
- High resistance to shear loads
- High clamp forces
- Robotic fastener installation and removal
- Low protrustion height from surface of airplane
Clamp Lock Fastener
1) Special ball tip design makes the Clamp Loc ideal for applications with limited backside hole clearance.
2) Large clamping area. Clamping face is precision machined with undercut to prevent damage to corner of hole regardless of clamping force.
3) Custom order diameters and lengths. Diameters available from .250 Inch to 1.250 Inch.
4) Standard Hex sizes.
5) Fully contained tool: Nothing protrudes past bottom hex.
2) Large clamping area. Clamping face is precision machined with undercut to prevent damage to corner of hole regardless of clamping force.
3) Custom order diameters and lengths. Diameters available from .250 Inch to 1.250 Inch.
4) Standard Hex sizes.
5) Fully contained tool: Nothing protrudes past bottom hex.
Refer to the product sheets to determine the part number you need. To request a quote, you may fill out our online quote form or contact us directly.
Round Body Fastener
1) Standard diameters and lengths are stocked. Custom order diameters and lengths available per your request. Available in 1.0 inch stroke.Large clamping area. Optional custom order angle on clamping face for clamping in countersunk finished holes. Diameter is held to -.001/-.003 of custom ordered diameters.
2) Short tool height once clamped. 2.0 inch total height above top surface when clamped.
3) Nothing will protrude from the back of the nut, even when clamped to the thinnest stacks. Works with existing pneumatic aerospace tooling.
2) Short tool height once clamped. 2.0 inch total height above top surface when clamped.
3) Nothing will protrude from the back of the nut, even when clamped to the thinnest stacks. Works with existing pneumatic aerospace tooling.